Nitrato di nichel(II) esaidrato
Ni(NO₃)₂·6H₂O

Nitrato di nichel(II) esaidrato

Nickel(II) nitrate hexahydrate, Ni(NO₃)₂·6H₂O (CAS 13478-00-7, 290.81 g/mol), is a green crystalline soluble nickel salt that dissolves to a Ni²⁺ feed stream with controlled acidity (pH 2-4 at D=1.35, 1-3 at D=1.50). Clean dissolution and the absence of chloride make it the working nickel source where downstream chemistry cannot tolerate halide contamination. In lithium-ion cathode production it is co-precipitated with cobalt and manganese sulfates/nitrates to build NMC hydroxide precursors, so trace Fe, Pb, Na, Cl and Si degrade precursor quality and carry through to cell performance. It also serves as a catalyst precursor and as the nickel salt in decorative and technical electroplating baths, where electrolyte makeup typically runs tens of g/L of dissolved nickel, adjusted to the bath. This grade is held to Ni ≥ 20%, Pb ≤ 10 ppm, Cl/Fe/Na/Mg/S/Si ≤ 50 ppm, Al/Ca ≤ 100 ppm — a battery-precursor-adjacent window verified by ICP-MS. Sourced multi-regionally, every lot ships with COA and MSDS/SDS, CIF Marmara or ex Gebze bonded stock, at container scale (~20 MT FCL) with smaller lots on request.

Specifiche tecniche

Ni≥ 20% min
Cl≤ 50 ppm
Fe≤ 50 ppm
Pb≤ 10 ppm
Al≤ 100 ppm
Ca≤ 100 ppm
Na≤ 50 ppm
Mg≤ 50 ppm
S≤ 50 ppm
Si≤ 50 ppm
Massa molare290.81 g/mol
pH (D=1.35)2 - 4
pH (D=1.50)1 - 3
CAS13478-00-7
FormaCristallo — verde

Standard Arsam

GradiGrado precursore per catodo NMC · CAS 13478-00-7
Riferimento internazionaleCAS 13478-00-7 · base grado di purezza
ImballaggioFusto HDPE da 25 kg · IBC da 1 MT · Big bag jumbo · ~20 MT FCL
DocumentazioneCOA · MSDS · SDS · FPC + CP (su richiesta)
Controllo qualitàICP-MS · soglia precursore per batterie
Ordine minimoScala container ~20 MT FCL / lotto minore su richiesta
IncotermsFOB / CIF / CFR / DAP
Tempi di consegnaTIR su strada (TR + paesi limitrofi) · container via mare (lunga percorrenza)

Gli standard internazionali costituiscono una base di riferimento; i certificati sono forniti su richiesta con verifica documentale.

Applicazioni

Applicazioni industriali
NMC cathode precursor (battery)
High-purity catalyst
Nickel plating (decorative + technical)
Laboratory & R&D

Domande frequenti

What is the Ni(NO₃)₂·6H₂O battery precursor application?
Used as the nickel source in NMC (Nickel-Manganese-Cobalt) cathode chemistry. Considered as an alternative to nickel sulfate prior to hydroxide precursor synthesis (NMC532, NMC622, NMC811 classes). Purity (especially Pb ≤10 ppm) directly impacts battery life.
Spec and theoretical calculation?
Ni(NO₃)₂·6H₂O molar mass 290.81 g/mol, theoretical Ni content 20.2%. Threshold Ni ≥20% min is consistent with standard high-purity hexahydrate (~99% purity equivalent). pH values (D=1.35: 2-4 / D=1.50: 1-3) for aqueous solution concentration control.
Dual use and export license?
Battery-adjacent grade nickel nitrate is in the dual-use category on certain countries' export control lists. For exports from TR, a DİT (Turkish Export Control Board) scope check is performed. Before shipment, end-user declaration + CIF route decision + payment route are coordinated with the customs broker.
In what packaging is it supplied?
25 kg HDPE drum standard, 1 ton IBC + 500 kg jumbo big bag for large tonnage. Container-scale (~20 ton FCL) supply available. Due to its hygroscopic nature, dry-climate storage + strict lid discipline are recommended.

Contatto rapido

Nitrato di nichel(II) esaidrato (Ni(NO₃)₂·6H₂O)

Richiedi preventivo per questo prodottoScarica la scheda tecnica (PDF)WhatsApp