Product Code · ferro-vanadium-fev

Ferrovanadium

FeV

Ferro Vanadium (FeV) is a master alloy that delivers vanadium to liquid steel for micro-alloying. Even at low addition, vanadium forms fine V(C,N) carbonitrides that precipitate during cooling and pin austenite grain boundaries, refining grain size while raising yield strength, toughness and wear resistance without a separate heat treatment. This grade carries V at 78-82% with C held to 0.30% max, P 0.06% max and S 0.05% max, suiting clean-steel chemistries where residuals must stay tight. Si is capped at 2.0% and Al at 1.5%, with 10-50mm sizing for controlled dissolution and stable recovery in ladle or EAF practice. Typical additions run 0.05-0.20 wt% V depending on target strength, common across HSLA structural plate, micro-alloyed rebar, spring steels and tool steels; FeV is also a feedstock for long-duration vanadium-flow energy storage. Every lot ships with COA and MTC. Multi-regional sourcing covers CIF Marmara delivery in 20 MT FCL or 5 MT LCL lots. Send your grade, tonnage and delivery terms for a current RFQ.

Chemical Specifications

Applications

• ▸HSLA steel
• ▸Rebar micro-alloying
• ▸Spring steel
• ▸Tool steel

Supply Terms